Low water peak Single-mode fibre-G.652.D-Single-mode fiber-Xi 'an Xigu Optical Communication Co., LTD

Description

Product Description

Conventional single-mode fiber G.652.D, also known as non-dispersion shift single-mode fiber with wavelength band extension, is the most widely used optical fiber with a working wavelength of 1310nm or 1550nm.

Product Features

"1"

Outstanding optical performance supporting high-speed transmission technologies such as DWDM and CWDM
"2"

Full Spectrum Utilization (Low Attenuation in the 1383nm Region)
"3"

Good protection and excellent strip force stability
"4"

Accurate geometrical parameters that ensure low splicing loss and high splicing efficiency

Product Technical Indicators

Characteristics	Conditions	Units	Specified values
Optical Characteristics
Attenuation	1310nm	dB/km	≤ 0.350
	1383nm	dB/km	≤ 0.340
	1550nm	dB/km	≤ 0.210
	1625nm	dB/km	≤ 0.240
Relative Wavelength Attenuation Changes	1310nm VS. 1285-1330mn	dB/km	≤ 0.04
Relative Wavelength Attenuation Changes	1550nm VS. 1525-1575mn	dB/km	≤ 0.03
Zero Dispersion Wavelength(λ0)	-	nm	1300-1324
Zero Dispersion Slope	-	ps/nm2·km	0.073-0.092
Dispersion	1550nm	ps/nm·km	13.3-18.6
Dispersion	1625nm	ps/nm·km	17.2-23.7
PMD	-	ps/√km	≤ 0.15
Cable Cutoff Wavelength(λcc)	-	nm	≤ 1260
Mode Field Diameter (MFD)	1310nm	μm	9.2±0.4
Mode Field Diameter (MFD)	1550mn	μm	10.4±0.5
Attenuation discontinuity	1310nm	dB	≤ 0.03
Attenuation discontinuity	1550mn	dB	≤ 0.05
Attenuation of the two-way end difference	1310nm	dB/km	≤ 0.04
Attenuation of the two-way end difference	1550mn	dB/km	≤ 0.04
Geometrical Characteristics
Cladding Diameter		μm	125±0.7
Cladding Non-Circularity		%	≤ 1.0
Core-Cladding Concentricity Error		μm	≤ 0.6
Coating Diameter		μm	242±7
Coating Diameter		μm	200±10
Coating-Cladding Concentricity Error		μm	≤ 12
Curl (Radius)		m	≥ 4
Environmental Characteristics 1550nm &1625nm
Temperature Dependence Induced Attenuation	-60℃ to +85℃	dB/km	≤ 0.03
Damp Heat Dependence Induced Attenuation	85℃ and 85% RH, for 30 days	dB/km	≤ 0.03
Watersoak Dependence Induced Attenuation	23℃, for 30 days	dB/km	≤ 0.03
Dry Heat Induced Attenuation	85℃, for 30 days	dB/km	≤ 0.03
Mechanical properties
Tension screening	-	GPa	0.69
Tension screening	-	kpsi	100
Coating Strip Force *	peak force	N	1.3-8.9
Coating Strip Force *	typical average force	N	1.0-5.0
Tensile Strength	Weber Probability 50%	GPa	≥ 4.00
Tensile Strength	Weber Probability 15%	GPa	≥ 3.20
Dynamic Fatigue Parameter(nd)	-	-	≥ 20
Macro-bend Induced Attenuation
Ø60mm×10	1550nm	dB	≤ 0.05
Ø60mm×10	1625nm	dB	≤ 0.05
Ø20mm×1	1550nm	dB	≤ 0.05
Ø20mm×1	1625nm	dB	≤ 0.05
*At a coating diameter of 200±10, the coating peel force peaks at 0.6-8.9 N and averages 0.6-5.0 N

Recommended Products

Bending Insensitive Single-mode Fibre-G657A1

Description：Single-mode fiber G.657.A1 not only has good bending resistance but also has good compatibility with G.652.D. At the same time, it can extend the coverage of the access network, which is the best product for optical fiber access.

View Details

Bend Insensitive single-mode fiber G.657.A2

Description：Single-mode fiber G.657.A2 is available in 200 μm and 242 μm diameters. The coating protection of high-performance resin composites enables 200μm fibers to have excellent flexural loss characteristics at reduced size, making them the best choice for broadband construction in metro and access networks.

View Details